Custom Wallpaper
At DPI Printers, we understand the transformative power of custom printed wallpaper. Our state-of-the-art printing technology and high-quality materials allow us to bring any design to life, whether it's a stunning photographic landscape, a vibrant geometric pattern, or a company logo for branding purposes. Custom printed wallpaper offers endless possibilities for personalizing and enhancing any space, from offices and retail stores to homes and event venues. With our customizable options and commitment to excellence, we take pride in helping our clients create unique, captivating environments that make a lasting impression. Reach out to us today to discover the endless possibilities of custom printed wallpaper.
Our Choice of Paper we use
Digimura NW Flaxen has a fabulous texture. The finish is reminiscent of papyrus or a coarse parchment, adding sophistication and character to both traditional works of art as well as even the most contemporary of designs. This polyester non-woven wallcovering will add both depth and richness to any interior.
A polyester and cellulose fibre mix - PVC free
Good opacity when using light to mid colours
Paste the wall application
Very low VOCs
CE certified; meets Construction Products Regulations EN 15102
Fully fire rated for all interior spaces, even when printed
Perfect for residential and low-to-medium traffic commercial interiors
CE Certified EN 15102:2007 + A1: 2011
Fire rating - EN 13501-1: C-s1, d0
FSC MIX Credit
Fitting Preparation
Brush off area to be covered with a stiff bristle brush to remove all dirt and loose material.
All surface marks should be removed using a detergent solution. Allow to dry thoroughly before applying Digimura-NW.
Remove any wall surface mould or algae with a fungicidal wash following instructions on the product. Allow to dry thoroughly before applying Digimura-NW.
Any holes, cracks or defects in the surface should be filled with a good quality filler, smoothed out and allowed to dry.
Just remember ... a dry surface is important – so if you have to make repairs to the wall, always allow the surface to dry thoroughly.
Fitting
Apply undiluted adhesive to the wall surface to be covered using a medium-pile paint roller and brush. Only paste one drop area at a time. • Use a Papergraphics Digital wallcovering spatula to apply Digimura-NW
using a smooth up-and-down motion. Take care not to squeeze the adhesive out at the edges.
Let Digimura-NW settle for about 15 minutes before trimming the top and bottom.
If you are overlapping and trimming Digimura-NW, overlap sufficiently to match up the design and then trim down the middle ensuring that Protective Plastic Strips are used to prevent damage to the wall. If you do not want to make the join immediately, turn back the edges by about 5cm (2”) until you are ready to continue.
If you are butt joining Digimura-NW, align the design to match, top to bottom and work away from the butted edge with the same up-and-down motion using the spatula.
Never assume bubbling will dry out. Any areas of bubbling must be rectified while the adhesive is still wet
Never allow adhesive to contaminate the face of the material, as complete removal may be impossible.
Drops
All wallpaper is supplied in 1m drops with 20mm overlap
At DPI Printers, we understand the transformative power of custom printed wallpaper. Our state-of-the-art printing technology and high-quality materials allow us to bring any design to life, whether it's a stunning photographic landscape, a vibrant geometric pattern, or a company logo for branding purposes. Custom printed wallpaper offers endless possibilities for personalizing and enhancing any space, from offices and retail stores to homes and event venues. With our customizable options and commitment to excellence, we take pride in helping our clients create unique, captivating environments that make a lasting impression. Reach out to us today to discover the endless possibilities of custom printed wallpaper.
Our Choice of Paper we use
Digimura NW Flaxen has a fabulous texture. The finish is reminiscent of papyrus or a coarse parchment, adding sophistication and character to both traditional works of art as well as even the most contemporary of designs. This polyester non-woven wallcovering will add both depth and richness to any interior.
A polyester and cellulose fibre mix - PVC free
Good opacity when using light to mid colours
Paste the wall application
Very low VOCs
CE certified; meets Construction Products Regulations EN 15102
Fully fire rated for all interior spaces, even when printed
Perfect for residential and low-to-medium traffic commercial interiors
CE Certified EN 15102:2007 + A1: 2011
Fire rating - EN 13501-1: C-s1, d0
FSC MIX Credit
Fitting Preparation
Brush off area to be covered with a stiff bristle brush to remove all dirt and loose material.
All surface marks should be removed using a detergent solution. Allow to dry thoroughly before applying Digimura-NW.
Remove any wall surface mould or algae with a fungicidal wash following instructions on the product. Allow to dry thoroughly before applying Digimura-NW.
Any holes, cracks or defects in the surface should be filled with a good quality filler, smoothed out and allowed to dry.
Just remember ... a dry surface is important – so if you have to make repairs to the wall, always allow the surface to dry thoroughly.
Fitting
Apply undiluted adhesive to the wall surface to be covered using a medium-pile paint roller and brush. Only paste one drop area at a time. • Use a Papergraphics Digital wallcovering spatula to apply Digimura-NW
using a smooth up-and-down motion. Take care not to squeeze the adhesive out at the edges.
Let Digimura-NW settle for about 15 minutes before trimming the top and bottom.
If you are overlapping and trimming Digimura-NW, overlap sufficiently to match up the design and then trim down the middle ensuring that Protective Plastic Strips are used to prevent damage to the wall. If you do not want to make the join immediately, turn back the edges by about 5cm (2”) until you are ready to continue.
If you are butt joining Digimura-NW, align the design to match, top to bottom and work away from the butted edge with the same up-and-down motion using the spatula.
Never assume bubbling will dry out. Any areas of bubbling must be rectified while the adhesive is still wet
Never allow adhesive to contaminate the face of the material, as complete removal may be impossible.
Drops
All wallpaper is supplied in 1m drops with 20mm overlap
At DPI Printers, we understand the transformative power of custom printed wallpaper. Our state-of-the-art printing technology and high-quality materials allow us to bring any design to life, whether it's a stunning photographic landscape, a vibrant geometric pattern, or a company logo for branding purposes. Custom printed wallpaper offers endless possibilities for personalizing and enhancing any space, from offices and retail stores to homes and event venues. With our customizable options and commitment to excellence, we take pride in helping our clients create unique, captivating environments that make a lasting impression. Reach out to us today to discover the endless possibilities of custom printed wallpaper.
Our Choice of Paper we use
Digimura NW Flaxen has a fabulous texture. The finish is reminiscent of papyrus or a coarse parchment, adding sophistication and character to both traditional works of art as well as even the most contemporary of designs. This polyester non-woven wallcovering will add both depth and richness to any interior.
A polyester and cellulose fibre mix - PVC free
Good opacity when using light to mid colours
Paste the wall application
Very low VOCs
CE certified; meets Construction Products Regulations EN 15102
Fully fire rated for all interior spaces, even when printed
Perfect for residential and low-to-medium traffic commercial interiors
CE Certified EN 15102:2007 + A1: 2011
Fire rating - EN 13501-1: C-s1, d0
FSC MIX Credit
Fitting Preparation
Brush off area to be covered with a stiff bristle brush to remove all dirt and loose material.
All surface marks should be removed using a detergent solution. Allow to dry thoroughly before applying Digimura-NW.
Remove any wall surface mould or algae with a fungicidal wash following instructions on the product. Allow to dry thoroughly before applying Digimura-NW.
Any holes, cracks or defects in the surface should be filled with a good quality filler, smoothed out and allowed to dry.
Just remember ... a dry surface is important – so if you have to make repairs to the wall, always allow the surface to dry thoroughly.
Fitting
Apply undiluted adhesive to the wall surface to be covered using a medium-pile paint roller and brush. Only paste one drop area at a time. • Use a Papergraphics Digital wallcovering spatula to apply Digimura-NW
using a smooth up-and-down motion. Take care not to squeeze the adhesive out at the edges.
Let Digimura-NW settle for about 15 minutes before trimming the top and bottom.
If you are overlapping and trimming Digimura-NW, overlap sufficiently to match up the design and then trim down the middle ensuring that Protective Plastic Strips are used to prevent damage to the wall. If you do not want to make the join immediately, turn back the edges by about 5cm (2”) until you are ready to continue.
If you are butt joining Digimura-NW, align the design to match, top to bottom and work away from the butted edge with the same up-and-down motion using the spatula.
Never assume bubbling will dry out. Any areas of bubbling must be rectified while the adhesive is still wet
Never allow adhesive to contaminate the face of the material, as complete removal may be impossible.
Drops
All wallpaper is supplied in 1m drops with 20mm overlap